Payment & Shipping Terms:
|Phase:||Three Phase Online Ups||Material:||Metal|
3 phase ups system,
3 phase battery backup
Industrial ups 250kva ups power generator 250kva Three-phase Online UPS with IGBT, Output Transformer
Basic Features :
With dual conversion true online design and digital technology, this kind of UPS has perfect protection and high reliability.
1. Inverter adopts DSP, MCU and DDC digital vector control technology to commend each specification and control them completely.
2. Integrating advanced IGBT and PWM to decrease the system noise and wastage of the electric power and to make sure customers can obtain high-quality output voltage and the upmost benefit under various loads.
3. Due to dual conversion and pure online sine wave output, the UPS can provide low distortion and pure sine wave power supply and the optimal power guarantee for the users' load devices both on main mode and battery mode.
4. It is with output isolation transformer to ensure the load and public electricity to be isolated completely. There is no DC in the load for the UPS with isolation transformer, which can effectively protect computer, network, and communication devices from damaging of DC. Besides, for the nonlinear load, it can improve the load capability of the machine and with good compatibility.
5. Automatic frequency /corresponding synchronous function avoid skipping frequency to influence the devices.
6. With perfect protections: AC input low and over voltage protections, output low and over voltage protections, output overload and short circuit protections, low battery protection, and over temperature inner of machine protection to ensure the stability and reliability of the system running.
7. Using the big power IGBT makes the inverter with the strong ability of overload and resistant impact, and enhances the adaptation to the electric environment.
Flexible parallel technology is fit for various loads, 1+1 parallel, N+1 parallel running;
Each UPS in parallel is working alone and synchronous track will be adjusted to optimality ( phasic difference less than 0.50 ). The UPS can Share the load precisely and when the inverter break down, the failure UPS will shut off automatically from the parallel system to ensure that the parallel system can provide high quality AC power supply to the load. The circumfluence of the parallel system is almost zero and current imbalance is less than 2%.
Multi-UPS parallel system: It allows the users to parallel 8 pieces of UPS at the most. Advanced monitor and DSP digital control technology makes the parallel system as easy as unit UPS and all the UPS are equal, no primary and secondary relation and it's the true equality. If you have bought one similar unit of UPS, when you need to increase the capacity or enhance the reliability, you can extend it to '1+1' parallel system easily and can continue to extend it to N+X multi-UPS system.
System is through strict tests of short circuit and 2KVA high voltage isolation.
Full digital control technology makes the whole unit more precise, prompt, reliable and stable.
Strong intelligent monitor function can provide RS232, dry contact and parallel interface.
UPS power supply environment monitor system, with the international advanced technology, develops intelligent unit and monitor management software and provides users with professional, complete, practical and reliable power monitor project, which enable the intelligent network to manage the UPS system promptly and reliably. UPS convergent monitor managing software can control the UPS everywhere in the world and inform a huge UPS power network monitor managing system.
Monitor software features:
1. Face single user real-time monitoring;
2. Face large-scale WAN centralized management real-time monitoring.
Choosing 12 impulses to correct input power factor effectively and restrain the pollution caused by UPS.
|Depth x Height(mm)||850 x 1900||1000 x 1900||1000 x 1900|
|Connections Type||Hard Wire 4-wire (3Ph + G)|
|Voltages||380 - 400 - 415 Vac three-phase|
|Frequency||45 - 65 Hz|
|Power Factor(at linear load)||> 0,99||> 0,99||> 0,99||> 0,99||> 0,99||> 0,99||> 0,99||> 0,99|
|Total harmonic(THDI)(at linear load)||＜3%|
|Output Characteristics (inverter)|
|Connections Type||Hard Wire 5-wire (3Ph+N+G)|
|Output Voltage Rated||380 - 400 - 415 Vac three-phase + N (selectable)|
|Output Voltage||Steady state||± 1%|
|stability||Transient state||± 5%|
|Frequency||50 or 60 Hz (selectable)|
|Frequency stability||± 0.05%|
|Frequency Synchronisation Range||± 5Hz(Equal to bypass working range)|
|Frequency Synchronisation Speed||(1~2)Hz/s|
|Load Crest Factor||3:1|
|Total||linear load||< 1%|
|Dynamic in-rush voltage range||0%->100%->0% load:≤1%|
|Dynamic recovery time (III Grade)||0%~100%RCD load:<20 ms recover to 90% of nominal voltage|
|Phase Displacement||120º ±1°|
|Overload Operation||110% for 60minutes|
|125% for 10minutes|
|150% for 1minute|
|200% for 7seconds|
|Short-circuit capability||180% for second|
|Transient response time|
|Rectifier/Charger/Batteries and energy storage|
|Rated output voltage||DC 480V|
|Charger voltage||Adjustable range of DC 524V ~ 576V||Adjustable range of DC 542V ~ 576V|
|Battery||Support VRLA Battery||Yes|
|Battery voltage window||40 Blocks (setting range 40 ~ 43)|
|Connections Type||Hard Wire 5-wire (3Ph+N+G)|
|Input voltage range||220V ±15%(setting range ±10% ~ ±25%)|
|Overload/Short-circuit capability||110% for 60 minutes,125% for 10 minutes,150%per 1 minute|
|1second(Rated *7 ),500 ms(Rated *8 ) ,200 ms(Rated *9 ) ,100 ms (Rated *10 ),100 ms (Rated *14 )|
|Efficiency(at linear load)||93.50%||93.50%||93.50%||93%||93%||93%||93%||94.5%|
|ECO mode (Non-parallel models)||Yes|
|Over Temperature Protection||Rectifier/Charger/Inverter(90℃)|
|Clearance/Installation back side||60 cm - Back to back|
|0 cm side to side|
|Applications||Data Centers ,Telecommunications, Industrial processes , electro-medical systems|
|Interface, Monitoring, Communication, Option|
|Remote communication slot||1 slots for communication cards to accommodate SNMP card|
|Remote communication cards(STANDARD)||Modbus RS-232 / RS-485|
|Remote communication cards(OPTION)||SNMP|
|Dry contacts terminal blocks||3 outputs 2inputs|
|Acoustic noise at 1M||65~ 70 dBA at full load||72 dBA at full load|
|Ambient operating temperature||0~35degree continuous|
|40° full load 8 hours nominal input voltage, recharging batteries, no overload.|
|Working at 45°C derating to 85%, with linear load|
|Ambient storage temperature||-25℃~55℃|
|Humidity||0 to 90% without condensing|
|Altitudes(Output power derating)||1000M:1|
The service we can supply:
1.10 years factory, engineers with 15years experience average
2. Supply OEM/ODM service----the logo,color,plugs and sockets,LED/LCD display,USB port,RJ45/11 port, etc.
3.Samples/Small order for testing welcomed.
4.Any customized design is welcomed.
5.1-3 years warranty, provide technical training
6.Provide 365days,7*24hrs hot-line service to user to advisory for the problems of the shangyu service, products, technical, business and fault repair, service Hot-line is 400-0505-800
Why choose Shangyu?
1. 20 years experience engineers
2. 5 years UPS and UPS Battery export experiences
3. 10 years UPS and UPS Battery manufacturer experiences
4. 3 years of high-level OEM Experience
5. 200 Employees.
6. 5,000 square meters Factory Size (Sq.meters)
7. 10,000pcs Monthly Capacity
8. Export Percentage: 50%
9. Hi-tech Advanced R&D Team
10. Certifications--Applied with CE,TCL,ISO 9001,ISO14001 etc
11. 1 years warranty for UPS & UPS Battery.
12. Supply the technology training.
Customers Provide proper instructions to the technical support department through proper procedures to explain the cause and condition of any damage to the product.The detail procedure of warranty as belowing:
1.Send Photo or video of damage products with Serial number label to shangyu,will reply you in 12 hours.
2.The technical engineers will send the Detection table to you for feedback in 24hours.
3.Fault handling and suggestion table will be send to you in 48hours after technical department get the Detection table.
4. We will send you the spare parts by free if the problems caused by us during warranty period.If it is the men-made problems,we also send the spare parts,but you should pay.
5.Other problems can be solved according to the Fault handling and suggestion table.If any misunderstand,call us immediately.
Contact Person: Mr. Mikel